PATLITE WDR-LE - Manual (Page 66)

64
Wireless Data Aquisition System Comprehensive User's Manual
＜ Log Display ＞
No. Name Function
❶ [Run/Stop] Button "Run" and "Stop" button for the Application Software.
During the "Run" operation, the "Stop" displays in red, during the "Stop"
operation, the "Run" displays in green.
❷ Select (USB/LAN) Select the method of connection to the Computer.
❸ COM Port (For USB Only) Select the COM port for the USB.
❹ Connected Transmitter Displays the MAC Address of the connected transmitter.
❺ [Log Clear] Button Clears the log in the monitor display area ❻ .
❻ Data Reception Condition Monitor
Area When the signal tower condition changes, it is logged in the monitor area.
Depending on the condition, the color distinquishes the status as indicated
below:
Yellow ： Signal Strength
Orange ： Message
Blue
： Transmitter (Data sent from computer)
Green ： Receiver (Data sent from transmitter)
❼ [Signal Strength] Button Displays signal strength in yellow in the Data Reception Condition Monitor
Area.
❽ [Message] Button Displays messages in orange in the Data Reception Condition Monitor Area.
Note
● This diagram designates the USB connection. For LAN connection, ❸ will display the IP Address and
Port.
❶
❽
❸
❹
❷
❺ ❻
❼