4 accessories for nord parameterisation boxes – NORD Drivesystems BU0040 User Manual
Page 41
2 Parameter Boxes
– Accessories
BU 0040 GB-0113
Subject to technical alterations
41
2.4 Accessories for NORD parameterisation boxes
(except SK TU3-xxx)
2.4.1
SK IC1-232/485 interface converter
The SK IC1-232/485 interface converter converts signals from RS485 to RS232.
This converter is used for connecting a PC or a laptop to a NORD frequency
inverter (RS485) or to a series PAR-2x ParameterBox.
With the aid of the NORD
CON software the frequency inverter or the
ParameterBox can be controlled and parameterised. In addition, the software
provides a convenient diagnostic tool with an oscilloscope function in order to
enable the optimisation of drive solutions. (SK IC1-232/485, Part No. 276970020)
Note: An adapter can be supplied for the power supply (5V/250mA) from the PC USB port to the converter. Please make
sure that the USB port is suitable for high power devices. A connected ParameterBox is also supplied via this 5V.
2.4.2
Cable-Adapter assignment
The following table shows the necessary adapters for use with the various parameter boxes. The assignment of the
adapters to individual inverter series and the parameter boxes to be used can be obtained from the other table in
this section.
2.4.2.1 Adapter list
Serial No.
Illustration
Name
Article number
1
“Modular cable
Straight RJ12 (6/6) -
RJ12 (6/6) cable”
Not a NORD item
generally available
2
“Connection cable
M12 socket
RJ12”
Part No.: 278910230
3
“Connection cable
M12 plug RJ12
”
SK TIE4-M12-RJ12
Part No.: 275274600
4
“Connection cable
M12 socket
free leads”
Part No.: 278910200
5
“Connection cable
SUB-D 9
free leads”
Part No.: 278910020
6
“Connection cable
M12 socket SUB-D 9
”
Part No.: 278910210
7
“Connection cable
USB2.0 plug A
to plug B”
Not a NORD item
generally available
8
Interface converter
“SK IC1-232/485”
Part No.: 276970020
9
„
Connection cable
USB/5V SK IC1-232/485
“
Part No.: 278910220
RS 485 +
RS 485 -
GND
+ 5V
n.c.
n.c.
RS 485 +
RS 485 -
GND
+ 5V
n.c.
n.c.
RS 485 +
RS 485 -
GND
+ 5V
RS 485 +
RS 485 -
GND
+ 5V/+15V