NORD Drivesystems BU0040 - Manual (Page 40)

NORDAC Control and Parameter Boxes
40 Subject to technical alterations BU 0040 GB-0113
Display
Error number
Fault
Text in the ParameterBox
Cause

Remedy
Warnings
240 Overwrite data?
→ Yes
No
These warnings indicate that there is a possibly significant change which
needs additional confirmation.
Once the next procedure has been selected, it must be confirmed with the
"ENTER" key.
241 Delete data?
→ Yes
No
242 Different SW version?
→ Next
Cancel
243 Different series?
→ Next
Cancel
244 Delete all data?
→ Yes
No
Inverter control error
250 This function is not enabled The function requested is not enabled at the frequency inverter parameter
interface.

Change the value of the parameter >Interface< of the connected
inverter to the required function.
More detailed information can be obtained from the operating
instructions for the frequency inverter.
251 Control command was not successful The control command cannot be implemented by the frequency inverter, as
a higher priority function, e.g. Quick stop or an OFF signal to the control
terminals of the frequency inverter is present.
252 Control is not possible offline Call up of a control function in Offline mode.

Change the operating mode of the ParameterBox in the
parameter >Operating Mode< P1302 to Online and repeat the
action.
253 Error acknowledgement not successful The acknowledgement of an error at the frequency inverter was not
successful, the error message remains in effect.
Error message from inverter
Inverter error
number Inverter error text A fault has occurred in the inverter with the number displayed. The inverter
error number and text are displayed.
2.3 Technical data
Name SK TU3-PAR SK PAR-2H SK PAR-2E SK PAR-3H SK PAR-3E SK CSX-3H SK CSX-3E SK TU3-CTR
Control voltage 4.5V
DC
… 30V
DC
Power
consumption
approx. 1.3 W approx. 1.3 W approx. 1.3 W approx. 1.3 W approx. 1.3 W approx. 1.0 W approx. 1.0 W approx. 1.0 W
Display Plain text display 4-digit, 7-segment display
Interfaces SPI-Bus RS485 RS485 RS485 and RS485 RS485 RS485 SPI-Bus
Ambient
temperature
0°C … 40°C
Protection class IP20 IP54 1) IP54 2) IP54 3) IP54 2) IP54 3) IP54 2) IP20
Dimensions
(L x W x D) (73 x 100 x 20)
mm
(90 x 145 x 27)
mm
(100 x 162 x
38) mm
(117 x 73 x 24)
mm
(128 x 83 x 32)
mm
(117 x 73 x 24)
mm
(128 x 83 x 32)
mm
(73 x 100 x 20)
mm
Weight approx. 0,2 kg 0.7 kg 0.5 kg 0.2 kg 0.6 kg 0.2 kg 0.6 kg 0,2 kg
Connection
cable length
Not possible approx. 3m approx. 2m approx. 2m Not possible
1) with plug inserted
2) on the front side
3) on plug socket IP20