NORD Drivesystems BU0040 - Manual (Page 32)

NORDAC Control and Parameter Boxes
32 Subject to technical alterations BU 0040 GB-0113
2.2.2.4 Data transfer with NORD CON (except for, SK TU3-PAR)
The NORD ParameterBox S1 to S5 storage elements can be managed using the NORD CON control and
parameterisation software.
In order to achieve transfer or the data between the inverter and SK PAR-2x, the serial interface of the PC (RS232)
must be connected to the ParameterBox via an interface converter (RS232/485) (see also Section 2.1.1.2). We
recommend the interface converter SK IC1-232/485. The converter and the ParameterBox are powered by an
external power supply (5V/250mA). Connection is made to the 3mm socket at the side of the interface converter,
using an adapter from the USB port,
Please ensure that the USB port is suitable for high power devices.
In order to transfer data between the inverter and SK PAR-3H, only a normal USB connection cable (USB2.0
connection cable, A-series plug to B-series plug) is required. The power supply to the box is also via this
connection.
The necessary driver software for the USB interface on the PC is supplied with the enclosed CD "EPD" (in folder
Disk13 of the NORD CON installation file), but is also available free of charge on our Internet page
(www.nord.com).
Please ensure that the USB port is suitable for high power devices. A USB2.0 port is required on the PC.
ATTENTION
Damage to PC
The SK PAR-3H ParameterBox must never be connected simultaneously to the frequency inverter and the PC,
as otherwise this may cause damage, especially to the PC.
The following components are required for the ParameterBox  PC/laptop connection:
ParameterBox
SK PAR-2H
Part No. 278910100
Adapter M12 So/SUB-D
for SK PAR-2H  SK IC1
Part No. 278910210
Interface converter
SK IC1-232/485
Part No. 276970020
Software
NORD CON
www.nord.com
Adapter USB/5V for
SK IC1-232/485
Part No. 278910220
PC / laptop
RS232
USB port
ParameterBox
SK PAR-2E
Part No. 278910110
GND
RS 485+
RS 485-
+5/ +15V
Adapter SUB-D / free leads
for SK PAR-2E  SK IC1
Part No. 278910020
Interface converter
SK IC1-232/485
Part No. 276970020
Adapter USB/5V for
SK IC1-232/485
Part No. 278910220
RS232
USB port
PC / Laptop
Software
NORD CON
www.nord.com