Thermo Fisher Scientific CyberScan pH 1100/pH 2100 User Manual
Page 7
Instruction Manual
pH 1100/ 2100
7
1.2 Keypad
See Figure 1.
A large membrane keypad with touch feedback makes the meter easy to use. Names and symbols describe the function
button controls.
Figure 1: Membrane Keypad
ON/OFF
Power meter On or Off
ENTER
Confirm selection in all modes of operations;
Scroll through the sub-menus program in the SETUP modes
EXIT
Exit from current modes of operations;
Exit from calibration mode after 3
rd
point calibration (for pH/Ion)
CAL /
¾
Enter into calibration modes of the meter;
Select or scroll to the next options available
MODE
Select the measurement modes:- pH, Ion Concentration, mV, Relative mV
HOLD
Freeze the displayed value; allow you to print the held reading or store it into
memory
SETUP
Enter SETUP mode of the meter for customization of meter functions as well as
view some diagnostic functions (refer to the table for details of SETUP menus)
¿
/ MI
Store the displayed value into memory;
Increment values or scroll through the next options available
À
/ MR
Recall stored values from the memory in the Last-In-First-Out (LIFO) sequence;
Decrement values or scroll through the next options available
Send measured data being measured or data stored in the memory to a
peripheral device via the RS232C port of meter
Numeric Keys (0-9 & .)
Enter numeric values and decimal point at appropriate places
- (Minus)
Enter negative sign at appropriate places