Thermo Fisher Scientific CyberScan CON 11/CON 110 - Manual (Page 75)

Instruction Manual CON 11/110
71
15 SPECIFICATIONS
SPECIFICATIONS CON 11 CON 110
Conductivity Range 0 to 19.99 µS/cm,
20.0 to 199.9µS/cm,
200 to 1999 µS/cm;
2.00 to 19.99 mS/cm,
20.0 to 199.9 mS/cm 0 to 19.99 µS/cm,
20.0 to 199.9µS/cm,
200 to 1999 µS/cm;
2.00 to 19.99 mS/cm,
20.0 to 199.9 mS/cm
TDS Range 0.00 to 9.99 ppm
10.0 to 99.9 ppm
100 to 999 ppm;
1.00 to 9.99 ppt
10.0 to 99.9 ppt 0.00 to 9.99 ppm
10.0 to 99.9 ppm
100 to 999 ppm;
1.00 to 9.99 ppt
10.0 to 99.9 ppt
Resolution 0.05 % Full Scale 0.05 % Full Scale
Accuracy ±1% F.S. +1 digit ±1% F.S. +1 digit
Temperature Range -10.0 to 110.0 °C -10.0 to 110.0 °C
(14.0 to 230 °F)
Temperature
Resolution
°C
0.1 °C 0.1 °C
Temperature
Resolution
°F
Not available 0.1 °F(from 14.0°F to 199.9°F) &
1.0 °F(from 200°F to 230°F)
Temperature Accuracy ± 0.5 °C ± 0.5 °C (±0.9 °F)
Cell Constant, K 0.1, 1.0, 10.0 (Selectable) 0.1, 1.0, 10.0 (Selectable)
Temperature
Compensation Automatic / Manual (from 0 to
100°C) Automatic / Manual (from 0 to
100°C)
Temperature
Coefficient 0.0 to 10.0% / ° C 0.0 to 10.0% / ° C
Normalisation
Temperature 20.0 or 25.0°C 20.0 or 25.0°C
TDS Factor 0.40 to 1.00 0.40 to 1.00
Calibration Points
(Automatic) 84.0, 1413µs/cm; 12.88, 111.8
mS/cm 84.0, 1413µs/cm; 12.88, 111.8
mS/cm
Calibration Points
(Manual) User defined standard / 1 per
range up to 5 points.
User defined standard / 1 per
range up to 5 points.
Single/Multi point
calibration Selectable Selectable
Calibration Range 10% to full scale 10% to full scale
Auto-ranging Yes (manual select available ) Yes (manual select available )
HOLD Function Yes Yes
Memory 50 Data Sets 100 Data Sets
Auto Off Selectable Selectable
Auto Off Time 20 minutes after last key
operation 20 minutes after last key
operation