KROHNE IFC 090 Converter EN - Manual (Page 3)

0/2
Part C Special applications, functional checks, service, and order numbers 6/1-9/1
6 Special applications 6/1-6/4
6.1 Use in hazardous areas 6/1
6.2 RS 232 adapter incl. CONFIG software (option) 6/1
6.3 Stable signal outputs when measuring tube empty 6/2
6.4 Pulsating flow 6/3
6.5 Rapid changes in flowrate 6/3
6.6 Unsteady display and outputs 6/4
6.7 HART interface 6/5-6/6
7 Functional checks 7/1-7/12
7.1 Zero check with IFC 090 / D, signal converter, Fct. 3.03 7/1
7.2 Test of measuring range Q, Fct. 2.01 7/1
7.3 Hardware information and error status, Fct. 2.02 7/2
7.4 Faults and symptoms during start-up and process flow measurement 7/3-7/8
7.5 Test of primary head 7/9
7.6 Test of signal converter using GS 8A simulator (option) 7/10-7/12
8 Service 8/1-8/5
8.1 Replacement of power fuses 8/1
8.2 Changeover of operating voltage on AC Versions 1 and 2 8/1
8.3 Turning the display PCB 8/1
8.4 Retrofitting the display unit 8/2
8.5 Power fuses and illustrations to Sect. 8.1 to 8.4 8/2
8.6 Turning the converter housing of the compact flowmeters 8/3
8.7 IFC 090 Replacement of converter electronic unit 8/3
8.8 IFC 080 and SC 80 AS Replacement of electronic unit by IFC 090 8/4
8.9 Illustrations of the PCBs 8/5
9 Order numbers 9/1
Part D Technical data, measuring principle and block diagram 10/1-12/1
10 IFC 090 Technical data 10/1-10/5
10.1 Full-scale range Q
100%
10/1
10.2 IFC 090 F and ZD Dimensions and weights 10/1
10.3 Error limits at reference conditions 10/2
10.4 IFC 090 Signal converter 10/3-10/4
10.5 Instrument name plates 10/5
11 Measuring principle and function of the system 11/1
12 Block diagram - signal converter 12/1
Part E Index E1-E2
Printed form to accompany flowmeters returned to Krohne E3