KROHNE IFC 020 Converter EN - Manual (Page 3)

Installation and operating instructions IFC 020 0/2
Part C Special applications, functional checks, service, and order numbers 6/1-9/1
6 Special applications 6/1-6/6
6.1 HART interface 6/1-6/2
6.2 KROHNE RS 485 interface 6/2
6.3 Stable signal outputs when measuring tube empty 6/3-6/4
6.4 Pulsating flow 6/5
6.5 Rapid changes in flowrate 6/5
6.6 Unsteady display and outputs 6/6
7 Functional checks 7/1-7/8
7.1 Zero check, Fct. 3.03 7/1
7.2 Test of measuring range Q, Fct. 2.01 7/1
7.3 Hardware information and error status, Fct. 2.02 7/2
7.4 Faults and symptoms during start-up and process flow measurement 7/2-7/4
7.5 Test of signal converter using GS 8A simulator (option) 7/5-7/8
8 Service 8/1-8/9
8.1 Illustrations used for service work 8/1-8/2
8.2 Replacement of power fuses 8/3
8.3 Changeover of operating voltage on AC Versions 1 and 2 8/4
8.4 Replacement of electronics unit of signal converter 8/5
8.5 Cleaning the signal converter housing 8/5
8.6 Turning the converter housing of the compact flowmeters 8/6
8.7 IFC 020 K and F: Directions for folding the ribbon cable on the display unit 8/7
8.8 IFC 020 K and F: Illustrations of the PCBs 8/8
8.9 IFC 020 E: Illustrations of the PCBs 8/9
9 Order numbers 9/1
Part D Technical data, measuring principle and block diagram 10/1-12/1
10 Technical data 10/1-10/7
10.1 Full-scale range Q
100%
10/1
10.2 Error limits at reference conditions 10/2
10.3 IFC 020 signal converter 10/3-10/4
10.4 Dimensions and weights 10/5-10/6
10.5 Instrument name plates 10/7
11 Measuring principle 11/1
12 Block diagram - signal converter 12/1
Part E Index E1-E2
Printed form to accompany flowmeters returned to Krohne E3
5.15 Applications 5/12
5.16 Setting data 5/12
5.17 Communication interface 5/12
5.18 Control input E (IFC 020 E only) 5/12