KROHNE IFC 020 Converter EN User Manual

Page 2

Installation and operating instructions IFC 020

0/1

Contents

Versions IFC 020 signal converter

0/3

Items included with supply

0/3

Software history

0/3

System description

0/4

Product liability and warranty

0/4

CE / EMC / Standards / Approvals

0/4

Part A System installation and start-up

1/1-3/2

1 Electrical connection: power supply

1/1-1/8

1.1

Important installation notes – PLEASE NOTE !

1/1

1.1.1

Location

1/1

1.1.2

Only for separate systems/signal converters (F- and E versions)

1/1

1.1.3

Cable entries (K- and F versions)

1/1

1.2

Connection to power

1/2

1.3

Electrical connection of separate primary head (F- and E versions)

1/3-1/6

1.3.1

General information on signal cable A and B as well as field current cable C

1/3

1.3.2

Grounding of primary head

1/3

1.3.3

Stripping (preparation) of signal cable A and B

1/4

1.3.4

Cable length (max. distance between signal converter and primary head)

1/5

1.3.5

Connection diagrams I and II (IFC 020 F signal converter and primary head)

1/6

1.3.6

Connection diagrams III and IV (IFC 020 E signal converter and primary head) 1/7-1/8

2 Electrical connection of outputs and inputs

2/1-2/4

2.1

Current output I

2/1

2.2

Pulse output P and status output S

2/1

2.3

Control input E (applicable with IFC 020 E only)

2/2

2.4

Connection diagrams for outputs and inputs

2/3-2/4

3. Start-up

3/1-3/2

3.1

Power-on and measurement

3/1

3.2

Factory settings

3/1

3.3

Setting data

3/2

Part B IFC 020 / D Signal converter

4/1-5/12

Operation of the signal converter

4/1-4/12

4.1

Krohne operator control concept

4/1

4.2

Operating and check elements

4/2

4.3

Function of keys

4/3-4/4

4.4

Table of settable functions

4/5-4/9

4.5

Error messages in measuring mode

4/10

4.6

Reset totalizer and cancel error messages, RESET/QUIT menu

4/11

4.7

Examples of setting the signal converter

4/12

Description of functions

5/1-5/12

5.1

Full-scale range Q

100%

5/1

5.2

Time constant

5/1

5.3

Low-flow cutoff SMU

5/2

5.4

Display

5/2-5/3

5.5

Internal electronic totalizer

5/3

5.6

Current output I

5/4

5.7

Pulse output P

5/5-5/6

5.8

Status output S

5/7

5.9

Language

5/8

5.10

Entry code

5/8

5.11

Primary head

5/9

5.12

User-defined unit

5/10

5.13

F/R mode, forward/reverse flow measurement

5/11

5.14

Characteristic of outputs

5/11