KROHNE OPTIBAR DP 7060 C EN - Manual (Page 45)

START-UP
5
45
OPTIBAR DP 7060 C
www.krohne.com 04/2014 - 4003292001 - MA OPTIBAR DP 7060 C R01 en
5.4 Extended adjustment
The main menu is divided into five sections:
• Start-up
• Display
• Diagnosis
• Additional adjustments
• Info
5.4.1 Start-up
Measurement
loop name
Assign a unique device ID. This is useful or even necessary in digital systems and for monitoring large
systems.
Application In this menu item you select the application: differential pressure, level, flow, density and interface
are available. The default setting is differential pressure.
Units In this menu item the adjustment units, as well as the temperature unit are determined. The selection
of the adjustment unit determines the unit displayed in the "Min-adjustment" and "Max-adjustment"
items. In "Level" mode, it is possible to carry out the adjustment in a height unit (e.g. meters). To do
so, the density of the medium must also be specified.
Adjustment units Differential pressure and flow Differential pressure and flow Differential pressure and flow Differential pressure and flow
mbar, bar, Pa, kPa, MPa, psi, mmH2O,
mmHg, inH2O, inHg and user-defined
Level Level Level Level
Density input required:
mm, cm, m, in and ft
Density measurement Density measurement Density measurement Density measurement
kg/dm
3 and lb/ft 3
Interface Interface Interface Interface
mm, cm, m, in and ft with density input/unit
of media
Temperature unit ° C, °F and K
Static pressure mbar, bar, Pa, kPa, MPa, psi, mmH2O,
mmHg, inH2O and inHg
.book Page 45 Friday, May 2, 2014 10:25 AM