KROHNE OPTISWIRL 4070 EN - Manual (Page 60)

6
OPERATION
60
OPTISWIRL 4070
www.krohne.com 02/2013 - 4000150606 MA OPTISWIRL4070C R07 en
3.5.4 Oper. Temp.
→
(for saturated steam with
Sat. Temp. or Sup.Steam,
see menu items 3.4.2 and
3.5.3)
Operating temperature
° C
Unit ↑...^
Set temperature unit
0000000.0
°
C ^
Operating temperature
Disp. on /
Disp. off ↑...^
Display temperature /
Do not display temperature
3.5.5 Oper. press.
(available for SAT.STEAM
with SAT. P or
SUP.STEAM, see menu
items 3.4.2 and 3.5.3)
Operating pressure
Pa
Unit ↑...^
Set pressure unit
0000000.0
Pa ^
Operating pressure
Disp. on /
Disp. off ↑...^
Display pressure /
Do not display pressure
3.5.6 Oper. dens.
→
Density at operating pressure and operating
temperature
kg/m 3
Unit ↑...^
Set density unit
00000.0000
kg/m
3 ^ 1
Operating density
3.5.10 P-Excit. V
→
(available if P-Sensor =
Internal, see menu item
3.5.2)
0005.00000
V ^
Exciting voltage of pressure sensor
3.5.11 P-Sen.P1V1
→
(available if P-Sensor =
Internal, see menu item
3.5.2)
Pressure sensor:
Enter 1st calibration point
0001.00000
P1 kg/cm
2 g ↑…↑...
↑...^
0002.00000
V1 mV ↑…↑...↑...^
3.5.12 P-Sen.P2V2
→
(available if P-Sensor =
Internal, see menu item
3.5.2)
Pressure sensor:
Enter 2nd calibration point
0005.00000
P2 kg/cm
2 g
↑…→↑...→↑...^
0048.00048
V2 mV
↑…→↑...→↑...^
3.6
3.6.1 Remote 0.000
length/m
(max. = 15m)
3.6.2 Cable Coef 14.074
Cable Coef
Version Steam
Level Designation Selection / entry Explanation
MA_OPTISWIRL4070C_R07_en_150606_PRT.book Page 60 Wednesday, February 13, 2013 2:47 PM