KEPCO EL Series Electronic Load Operator Manual P/N 243-1295 Firmware Version 3.22 through 3.41 - Manual (Page 72)

B-12
SERIES EL 062011
B.72 STATus:OPERation:CONDition? QUERY
STAT:OPER:COND?
Syntax: Short Form: STAT:OPER:COND? Long Form: STATus:OPERation:CONDition?
Return Value:
Description: Returns the value of the Operation Condition Register. The Operation Condition Register contains
unlatched real-time information about the operating conditions of the load. Bit set to 1 = function
enabled (active, true); bit reset to 0 = function disabled (inactive, false).
B.73 STATUS:OPERation:ENABle COMMAND
STAT:OPER:ENAB
Syntax: Short Form: STAT:OPER:ENAB
Long Form: STATus:OPERation:ENABle
Description: Sets Operation Enable Register. The Operation Enable Register is a mask for enabling specific bits
in the Operation Event Register which will cause the operation summary bit (bit 7) of the Status Byte
register to be set. Bit set to 1 = function enabled (active, true); bit reset to 0 = function disabled (inac-
tive, false). The operation summary bit is the logical OR of all the enabled bits in the Operation Event
register.
B.74 STATus:OPERation:ENABle? QUERY
STAT:OPER:ENAB?
Syntax: Short Form: STAT:OPER:ENAB? Long Form: STATus:OPERation:ENABle?
Return Value:
Description: Reads Operation Enable Register. Returns value of Operation Enable Register bits. Bit set to 1 =
function enabled (active, true); bit reset to 0 = function disabled (inactive, false).
B.75 STATus:OPERation:NTRansition COMMAND
STAT:OPER:NTR
Syntax: Short Form: STAT:OPER:NTR Long Form: STATus:OPERation:NTRansition
Description: Negative transition enable register.
B.76 STATus:OPERation:PTRansition COMMAND
STAT:OPER:PTR
Syntax: Short Form: STATus:OPERation:PTRansition Long Form: STATus:OPERation:PTRansition
Description: Positive transition enable register.
B.77 STATus:QUEStionable[:EVENt]? QUERY
STAT:QUES?
Syntax: Short Form: STAT:QUES[EVEN]? Long Form: STATus:QUEStionable[EVENT]?
Return Value: =16 bits = actual Questionable register value
Description: Indicates questionable events that occurred since previous STAT:QUES? query. Returns the
value of the Questionable Event register. The Questionable Event register is a read-only register
which holds (latches) all events. Reading the Questionable Event register clears it.
B.78 CONDition:QUEStionable:CONDition? QUERY
STAT:QUES:COND?
Syntax: Short Form: STAT:QUES:COND? Long Form: STATus:QUEStionable:CONDition?
Return Value: =16 bits = actual Questionable condition register value
Description: Returns the value of the Questionable Condition Register. The Questionable Condition Register
contains unlatched real-time information about questionable conditions of the electronic load. Bit set to
1 = condition (active, true); bit reset to 0 = condition (inactive, false). (See example, PAR. B.74.)