Jenway Genova Nano German - Manual (Page 8)

SECTION 15 – PROTEIN 69
15.1 PROTEIN MENU OPTIONS 69
15.2 PIERCE 660 ASSAY 69
15.3 BCA ASSAY 69
15.4 BRADFORD ASSAY 70
15.5 LOWRY ASSAY 70
15.6 BIURET ASSAY 71
15.7 DIRECT UV 71
15.8 CALIBRATION AND SAMPLE MEASUREMENT 71
SECTION 16 – OD 600 72
16.1 MODE SPECIFIC PARAMETERS 72
16.2 METHOD SETUP 72
16.2.1 Selecting a Wavelength 72
16.2.2 Settings 73
16.2.2.1 Using a Standard 73
16.2.2.2 Using a Factor 74
16.2.2.3 Using an Instrument Factor 74
16.2.2.4 Setting the Dilution Factor 75
16.3 CALIBRATION 75
16.3.1 Calibrating to a Standard 76
16.3.2 Calibrating to a Factor 76
16.4 SAMPLE MEASUREMENT 76
16.4.1 Measuring a Sample After Calibrating to a Standard 76
16.4.2 Measuring a Sample After Calibrating to a Factor 77
SECTION 17 – SAVING, PRINTING AND AUTOLOGGING 78
17.1 SAVING METHODS 78
17.1.1 Saving Methods To Internal Memory 78
17.1.2 Saving Methods to USB Memory Stick 79
17.2 OPENING METHODS 80
17.2.1 Opening Methods From Internal Memory 80
17.2.2 Opening Methods From USB Memory Stick 80
17.3 DELETING METHODS 81
17.4 SAVING RESULTS 81
17.5 OPENING RESULTS 82
17.6 DELETING RESULTS 83
17.7 PRINTING 83
17.7.1 Print Setup 83
17.7.1.1 Print Setup – PHOTOMETRICS, CONCENTRATION, MULTIWAVELENGTH AND OD 600 84
17.7.1.2 Print Setup - SPECTRUM AND PURITY 84
17.7.1.3 Print Setup – QUANTITATION AND PROTEINS 84
17.7.1.4 Print Setup – KINETICS 84
17.7.2 Printing Results 85
17.8 AUTOLOGGING 85
17.8.1 Setting the Number of Sample Repetitions 85
17.8.2 Selecting Result’s Destination 87
17.9 LOCKED METHODS 87
17.10 CONNECTING TO A PC 87
SECTION 18 – ACCESSORIES AND SPARE PARTS 88
18.1 OPTIONAL ACCESSORIES 88
18.2 CONNECTING THE ACCESSORIES 88
18.2.1 Internal Printer 88
18.2.2 Passive Accessories 89
18.2.3 Active Accessories 89
6