Jenway Genova Nano German - Manual (Page 113)

Accessories No single cell - Method created on a unit with a single cell
accessory fitted
Accessories 8 cell turret icon - the automatic 8 cell turret is in use
Accessories Error finding cell position 0 on turret
Accessories No turret - Method created on a unit with a turret accessory
fitted
Accessories
°C
Degrees Celsius
Accessories
°F
Degrees Fahrenheit
Accessories Peltier accessory in use – current temperature is below set
point. The current temperature is displayed above set point
temperature
Accessories No Peltier - Method created on a unit with a Peltier accessory
fitted
Accessories Sipper pump in use – running in forward direction
Accessories Sipper pump in use – running in reverse direction
Accessories Timed sipper pump
Accessories Timed sipper pump calibration sequence
Accessories Start sipper pump – enables take up time to be set
Accessories Skip take up time – uses the previously set take up time
Accessories 000 000 – sets air gap to zero
Accessories Stop sipper pump
Accessories Reduce sample uptake/reduce air gap
Accessories Increase sample uptake/increase air gap
Accessories No sipper - Method created on a unit with a sipper accessory
fitted
Accessories Sipper Peltier pump in use
Accessories No sipper Peltier - Method created on a unit with a sipper
Peltier accessory fitted
Error Spanner – refer to section 20
111