HT instruments SIRIUS89N - Manual (Page 59)

SIRIUS89N
EN - 57
Indirect Leakage Current measurement in a
single phase system
Indirect Leakage Current measurement in a three
phase system
Direct Leakage Current measurement in a single
phase system
Direct Leakage Current measurement in a three
phase system
5. The Instrument shows in real time the values present in inputs.
05.06.01 11:43:04 Example of Input Signal 1
AUX
In1= 23°C
In1 PG+
Example of screen.
6. Press this key to enable/disable the HOLD function (updating interruption of the
displayed data). When the HOLD function is enabled, the word HOLD is
displayed. This key is disabled during a recording. It's not possible to run a
recording if this function is enabled.
7. The displayed result can be stored pressing the SAVE key twice (according to
paragraph 9.1).