HT instruments SIRIUS89N - Manual (Page 19)

SIRIUS89N
EN - 17
6.1.5. "AUTO", RT+", "RT-" faulty cases
LOW
Ω 05.06.01
Disconnect the External
Power Supply Adapter
If the instrument detect
the External Power
supply adapter
connected to instrument
will show the message
displayed to side.
-.- -Ω
R+ R-
---
Ω ---Ω
---mA ---mA
o REMOVE POWER
AUTO 0.11
Ω!
FUNC CAL
LOW
Ω 05.06.01
ATTENTION: the test was
not effected because of
voltage at the terminal
ends.
-.- -Ω
R+ R-
-.--
Ω -.--Ω
---mA ---mA
o VOLT IN INPUT
AUTO 0.11
Ω
FUNC CAL
If the terminal voltage is
higher than 15V, the
instrument does not
carry out the test and
displays the screen
alongside for 5 seconds.
LOW
Ω 05.06.01
ATTENTION:
R
CALIBRATION
>R
MEASURED
o 0.00Ω
R+ R-
0.00
Ω 0.00Ω
219mA 219mA
CAL > RES
AUTO 0.11
Ω
FUNC CAL
In case that:
R
CALIBRATION
>R
MEASURED
the instrument displays
the screen alongside.
THE PREVIOUS RESULTS CAN'T BE SAVED.