GW Instek GDS-1000-U Series Programming Manual - Manual (Page 53)

COMMAND DETAILS
53
Save/Recall Command
:MEMory:RECall:SETup ........................................53
:MEMory:RECall:WAVeform .................................53
:MEMory:SAVe:SETup ..........................................54
:MEMory:SAVe:WAVeform ...................................54
*RCL .............................................................................55
:REF:DISPlay ..........................................................55
:REF:LOCate ..........................................................56
:REF:SAVe ..............................................................56
*SAV .............................................................................57
:MEMory:RECall:SETup
Set
Description Recalls a panel setting from the internal memory.
Same as: Save/Recall key (recall) → F3
Syntax < Long > < Short >
:memory:recall:setup :mem:rec:set
Parameter Internal memory
1 ~ 15 S1 ~ S15
Example :memory1:recall:setup Recalls the settings from
the internal memory S1
:MEMory:RECall:WAVeform
Set
Description Recalls a waveform from the internal memory and
saves it to a reference waveform.
Same as: Save/Recall key (recall) → F4
Syntax < Long > < Short >
:memory:recall:waveform
:mem:rec:wav
Parameter Internal memory