GW Instek GDS-1000-U Series Programming Manual - Manual (Page 11)

COMMAND DETAILS
11
C
OMMAND DETAILS
The Command details chapter shows sysntax in
detail, the equivalent panel operation, and an
example for each command. For a list of all
commands, see page 7.
System command .................................... 12
Acquisition Command.............................. 14
Autoset Command ................................... 17
Channel / Math Command ....................... 18
Cursor Command ..................................... 23
Display Command .................................... 27
Measure command .................................. 30
Go No-Go Commands .............................. 40
Data Log Commands ............................... 50
Save/Recall Command ............................. 53
Time (Horizontal) command ................... 58
Trigger command ..................................... 61