GW Instek GDS-1000-U Series Programming Manual - Manual (Page 36)

GDS-1000-U Programming Manual
36
Syntax < Long > < Short >
:measure:vamplitude? :meas:vamp?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vamplitude? Selects Channel 1, and
then measures the rise
Voltage amplitude.
:MEASure:VAVerage
Query
Description Returns the average voltage.
Same as: Measure key → F1~F5 → F3 (Vavg)
Syntax < Long > < Short >
:measure:vaverage? :meas:vavg?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vaverage? Selects Channel 1, and
then measures the
average Voltage.
:MEASure:VHI
Query
Description Returns the global high voltage.
Same as: Measure key → F1~F5 → F3 (Vhi)
Syntax < Long > < Short >
:measure:vhi? :meas:vhi?
Returns
Note Before using this command, select the
measurement channel. See the example below.