GW Instek GDS-1000-U Series Programming Manual - Manual (Page 33)

COMMAND DETAILS
33
:measure:pduty? :meas:pdut?
Returns as the percentage
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:pduty? Selects Channel 1, and
then measures the
positive duty cycle.
:MEASure:PERiod
Query
Description Returns the period.
Same as: Measure key → F1~F5 → F3 (Period)
Syntax < Long > < Short >
:measure:period? :meas:per?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:period? Selects Channel 1, and
then measures the
period.
:MEASure:PWIDth
Query
Description Returns the first positive pulse width.
Same as: Measure key → F1~F5 → F3 (+Width)
Syntax < Long > < Short >
:measure:period? :meas:per?
Returns
Note Before using this command, select the
measurement channel. See the example below.