GW Instek GDS-1000-U Series Programming Manual - Manual (Page 48)

GDS-1000-U Programming Manual
48
:TEMPlate:SAVe:MINimum
Set
Description Saves the minimum template.
Same as: Utility key → More (F5) →Go-NoGo
Menu(F1)→Template Edit(F1)→Save & Create(F4).
Note Before this command can be used, please set the
template mode to normal using
the :TEMPlate:MODe 0 command.
Before any Go-NoGo command can be used,
please use the :GONogo:FUNCtion 1 command to
initialize the oscilloscope.
Syntax < Long > < Short >
:TEMPlate:SAVe:MINimum :TEMP:SAV:MIN
:TEMPlate:TOLerance
Set
Query
Description Sets or queries the tolerance (as a percentage) of
the auto template.
Note Before this command can be used, please set the
template mode to auto using the
:TEMPlate:MODe 1 command.
Before any Go-NoGo command can be used,
please use the :GONogo:FUNCtion 1 command to
initialize the oscilloscope.
Syntax < Long > < Short >
:TEMPlate:TOLerance
:TEMPlate:TOLerance? :TEMP:TOL
:TEMP:TOL?
Parameter/
Return parameter 4.0 ~ 40 (0.4% ~ 40%).
Example :TEMP:TOL 10 Sets the tolerance to
10%.