GW Instek GDS-1000-U Series Programming Manual - Manual (Page 31)

COMMAND DETAILS
31
Example :measure:source 1
:measure:fall? Selects Channel 1, and
then measures the fall
time.
:MEASure:FOVShoot
Query
Description Returns the fall overshoot amplitude.
Same as: Measure key → F1~F5 → F3 (FOVShoot)
Syntax < Long > < Short >
:measure:fovshoot? :meas:fovs?
Returns with % sign
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:fall? Selects Channel 1, and
then measures the fall
overshoot.
:MEASure:FPReshoot
Query
Description Returns fall preshoot amplitude.
Same as: Measure key → F1~F5 → F3 (FPREShoot)
Syntax < Long > < Short >
:measure:fovshoot? :meas:fovs?
Returns with % sign
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:fall? Selects Channel 1, and
then measures the fall
preshoot.