GW Instek GLA-1000 Series User Manual - Manual (Page 95)

Data Operation
95
Analysis step
1. Limit the analysis range if
necessary. Select “Select
Analytic Range” from the
Data menu. Move Ds and
Dp bar and limit the range.
For details, see page89.
2. Select the signal channel.
3. Select the Baud rate.
4. Select the Data Bit: 4 ~ 8.
5. Select the Stop Bit width:
1, 1.5, 2.
6. Select the Parity: none,
odd, even.
7. Select the Data direction:
MSB first, or LSB first.
8. Select how the data value is
displayed in the analysis
result: binary, decimal,
hexadecimal, or ASCII
text.