GW Instek GLA-1000 Series User Manual - Manual (Page 91)

Data Operation
91
Dialogue window
Analysis step
1. Limit the analysis range if necessary. Select “Select Analytic
Range” from the Data menu. Limit the analysis range by
moving Ds and Dp bar . For details, see
page89.
2. Enter the name of the new I 2 C Bus, created upon analysis
completion.
3. Select the SDA (Serial Data Line) and SCL (Serial Clock Line)
channel.
4. Select how the I2C Bus value will be displayed: Binary,
Decimal, or Hexadecimal.
5. Select the color of the new I 2 C analysis Bus. Click each bus
element’s color bar and select a new color from color chart.