GW Instek GLA-1000 Series User Manual - Manual (Page 48)

GLA User Manual
48
Signal Triggering Condition Setup
Trigger condition Don’t care
GLA captures all data regardless of its
condition.
High
GLA triggers capturing the signal when the
level is high.
Low
GLA triggers capturing the signal when the
level is low.
Rising edge
GLA triggers capturing the signal when the
level is changing from low to high.
Falling edge
GLA triggers capturing the signal when the
level is changing from high to low.
Either edge
GLA triggers capturing the signal when the
level is changing from one level to another, low
to high or high to low.
Set the condition
individually The following method sets the trigger condition for each channel
individually.
Method1
Select the target signal (A1 in this case) and:
Click the Trigger condition icon repeatedly
OR
Press the space bar repeatedly.