GW Instek GLA-1000 Series User Manual - Manual (Page 92)

GLA User Manual
92
Address/Data Start bit Read bit
Write bit ACK/NoAck bit Stop bit
6. Click the I2C Customize button
and open the Customize window.
7. Select the Read/Write bit
activation and polarity.
Click the Active radio
button and activate or
deactivate Read/Write bit.
8. In active mode, click the
Read Bit Conditions radio
button and select the
polarity. The Write Bit gets
the opposite polarity.
9. Select whether the NACK (Non-acknowledge) sign stops I 2 C
analysis or not.