GW Instek GLA-1000 Series User Manual - Manual (Page 85)

Data Operation
85
Bus search step
1. Select the Bus.
2. Select the Bus condition.
Normal Bus
I 2 C Bus
3. Set the Bus value range.
Enter the value directly
into Minimum and
Maximum column.
==
Search the Bus condition where its value
equals the MinPosition value.
Not=
Search the Bus condition where its value is
NOT equal to the MinPosition value.
In Range
Search the Bus condition where its value is
within the Min/Max Position range.
Not In Range
Search the Bus condition where its value is
outside the Min/Max Position range.
4. Select the search start position.
Beginning
The beginning of the captured data.