GW Instek GLA-1000 Series User Manual - Manual (Page 108)

GLA User Manual
108
Specification (cont.)
The specifications apply under the following conditions: GLA is powered on for at least 30
minutes, within +20°C~+30°C.
GLA-1016 GLA-1032 GLA-1132
Enable Channel 16 32 32
Enable
Condition Don’t care,
Low, High Don’t care,
Low, High Don’t care,
Low, High
Enable Delay 1 ~ 65535ms 1 ~ 65535ms 1 ~ 65535ms
Data Skew <1.5ns <1.5ns <1.5ns
Compression
Channels 16 24 24
Compression
Ratio Maximum 255 Maximum 255 Maximum 255
Signal
Statistics Positive/
Negative,
Full cycle
within length
condition Positive/
Negative,
Full cycle
within length
condition Positive/
Negative,
Full cycle
within length
condition
Protocol
Analyzer I2C, RS-232C I2C, RS-232C I2C, RS-232C
Current
Consumption Static Maximum
200mA Maximum
200mA Maximum
200mA
Working Maximum
400mA Maximum
400mA Maximum
400mA
Power
dissipation Static Maximum 1W Maximum 1W Maximum 1W
Working Maximum 2W Maximum 2W Maximum 2W
Power Interface USB USB USB
Working
voltage 4.5V ~ 5.5V 4.5V ~ 5.5V 4.5V ~ 5.5V
Temperature Operating 0°C ~ 50°C 0°C ~ 50°C 0°C ~ 50°C
Storage −40°C ~ 80°C −40°C ~ 80°C −40°C ~ 80°C