GW Instek GLA-1000 Series User Manual - Manual (Page 93)

Data Operation
93
10. Select the ACK bit polarity.
NoACK bit gets the
opposite polarity.
11. Enter the Data/Address display name and their bit length.
12. Address can be shifted one bit left and then ANDed with
Read/Write bit.
13. Press OK, Cancel, or
Default.
Default contents:
Read/Write active
Read Bit High
Stop analysis upon NACK
Ack Bit Low
Address 7 bit/Data 8 bit
No Address shift
14. Start/Stop I 2 C analysis.
A new I2C bus will be created with the result shown as
configured.