GW Instek GLA-1000 Series User Manual - Manual (Page 58)

GLA User Manual
58
Dialogue window
Enable Qualifier Click on the target channel icon and select the condition.
Don’t care
The signal level does not matter – always
captured (default).
High
The signal level must be high.
Low
The signal level must be low.
Example
The following Enable condition means:
GLA captures signals only when Port A has the following
condition.
A0 ~ A7: 01101101
The minimum distance, between each Enable qualified data block,
is 2 clocks. Otherwise (if the distance is only one clock) GLA
continues capturing data and do not delete unnecessary bits.