GW Instek GLA-1000 Series User Manual - Manual (Page 52)

GLA User Manual
52
Operator (Trigger
condition) ==
GLA triggers capturing data when the
entered value matches the real data.
Binary
Sets the value in binary mode: 0, 1, x (don’t
care).
Hexadecimal
Sets the value in Hexadecimal value: 0 ~ F.
Decimal
Sets the value in Decimal value: 0 ~ 9.
Don’t care
GLA triggers capturing data regardless of
the value.
Reset all trigger
conditions Resets all the bus trigger conditions to Don’t care (default) state.
Choose Reset from the Trigger menu.
→