GW Instek GLA-1000 Series User Manual - Manual (Page 26)

GLA User Manual
26
Power Up
This section assumes the software is already installed.
Hardware
connection
Connect GLA and the PC via the USB cable. Press the GLA
power switch and make sure the power LED turns On.
Software
activation
1. Double-click the desktop GLA icon or activate the
GLA from the program startup menu.
2. If the hardware connection error message appears, try the
following.
* Reset the GLA USB connection and try again.
* Make sure GLA and PC are connected by a single USB
cable (Do not use USB extension cable).
3. If there is already a setup file (*.gla) being saved, the software
asks whether to open it.