GW Instek GLA-1000 Series User Manual - Manual (Page 54)

GLA User Manual
54
Trigger Count Toolbar icon
Sets the number of times GLA skips triggering condition. Setting
is available in pull-down (1, 2, 3, 4, 5, 10, 15, 20) or direct entering.
Example
GLA starts capturing data at the first
triggering condition (default).
GLA starts capturing data at the fifth
triggering condition.
You can directly type in any number, up to
65,535.
Trigger Delay
dialogue window
Select the Trigger Delay tab in the Trigger Properties dialogue.
Trigger Page Toolbar icon
This function sets the length of skipped waveform (in data
memory blocks) after the triggering condition. Setting is available
in pull-down (1, 2, 3, 4, 5, 10, 15) or direct entering.
Waveform data in a single page = Sampling RAM size
(for RAM size setting, see page41)
Maximum trigger page for different RAM size
RAM size GLA-1016 GLA-1032 GLA-1132
2Kbit 8192 8192 8192
16Kbit 1024 1024 1024
32Kbit 512 512 512