Fire-Lite MRP-2002C Agent Release Control Panel - Manual (Page 162)

162 MRP-2002 Series Instruction Manual — P/N 53049:E2 3/7/2013
NFPA Standard-Specific Requirements NFPA 72 Auxiliary Fire Alarm System
NFPA 72 Remote Station Protective Signaling System
Notes:
1. Cut Jumper JP30 on the MRP-2002 main circuit board to supervise placement of the 4XTMF
module.
2. Refer to “4XTMF Municipal Box Transmitter Option Module” on page 33 for detailed
information.
RS82 Remote Station Receiver UL listed.
Refer to Instruction Manual for Remote Station Receiver Model RS82.
+ -
Polarity Shown is
Normal Standby
4XTMF Transmitter Module Cutting TBL Jumper allows the
reverse polarity circuit to open with
a system trouble condition if no
alarm condition exists.
Power limited
Figure C.3 Remote Station Connection Using 4XTMF Module
+
-
(Dummy load with a 4.7K , ¼ watt resistor
when no connection is made)