Fire-Lite MRP-2001C PRE-ACTION/DELUGE CONTROL PANEL User Manual
Fire-Lite Equipment
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- Section 1: Product Description
- Section 2: Installation
- 2.1 Backbox Mounting
- 2.2 Operating Power
- 2.3 Input Circuits
- 2.4 Output Circuits
- 2.5 Power-limited Wiring Requirements
- 2.6 Installation of Optional Modules
- 2.7 ANN-BUS Devices
- Section 3: Programming
- 3.1 User Programming
- 3.2 Initial Power-up
- 3.3 Programming Screens Description
- 3.4 Programming and Passwords
- 3.5 Master Programming Level
- 3.6 Maintenance Programming Level
- Section 4: Operating Instructions
- 4.1 Panel Control Buttons
- 4.2 Indicators
- 4.3 Normal Operation
- 4.4 Trouble Operation
- 4.5 Alarm Operation
- 4.6 Supervisory Operation
- 4.7 Disable/Enable Operation
- 4.8 Waterflow Circuits Operation
- 4.9 2nd-Shot Water Switch
- 4.10 Detector Functions
- 4.11 Coded NAC Operation
- 4.12 Release Stages
- 4.13 Special System Timers
- 4.14 Walktest
- 4.15 Read Status
- Section 5: Power Supply Calculations
- Appendix A: Circuit Mapping and Cross-Zoning
- Appendix B: FACP Configuration Templates
- B.1 Template 1: Single Hazard - 3 Zone
- B.2 Template 2: Single Hazard - Cross-Zone With Manual Release
- B.3 Template 3: Dual Hazard - Combined Release
- B.4 Template 4: Dual Hazard - Split Release
- B.5 Template 5: Single Hazard - 3 Zones and Low Pressure
- B.6 Template 6: Single Hazard - 2 Zones Cross-Zoned With All Active
- B.7 Template 7: Single Hazard - Dual Zone
- Appendix C: NFPA Standard-Specific Requirements
- Appendix D: FACP with Keltron
- Appendix E: Testing & Maintenance
- Appendix F: Wire Requirements
- Index