Fire-Lite ECC-50/100E Emergency Command Center - Manual (Page 66)

66
Emergency Command Center Manual —
P/N LS10001-000FL-E:A 4/10/2013
Programming
Main Menu - Utilities
3.2.1 Message Recording
The ECC allows up to 14 recorded messages. These custom messages can be recorded using the
local microphone, a USB port, or an external audio input. Clicking the Enable Recording will put
the system in message record mode. Refer to Section 3.4. When the button has been clicked, the
background screen will turn dark red, giving a visual cue that the system is ready to record. After
all messages have been successfully recorded, message recording must then be disabled. Simply
click the Disable Recording button.
3.2.2 USB File Options
The ECC system allows software files to be saved, shared, and transferred via the computer’s USB
port. The program file must be named CONFIG.TXT. When saving the program file to USB, it is
vital that no other files with the same name exist on the drive. The existing file will be completely
overwritten.
Only files named CONFIG.TXT can be recalled from a USB drive. The ECC system
will verify that the file is compatible.
After a Save or Recall has been performed, the screen will show “Processing USB Request”. Once
this is complete, the screen will show either a success message in green or a failure message in red.
If a failure message appears, correct the issue and try again.
m
s
g
re
c
o
rd
.j
p
g
m
s
g
d
is
a
b
le
.j
p
g
u
s
b
.j
p
g