Fire-Lite ECC-50/100E Emergency Command Center - Manual (Page 65)

Emergency Command Center Manual —
P/N LS10001-000FL-E:A 4/10/2013 65
Main Menu - Utilities
Programming
3.1.5 Date / Time
Set the local time and date for the panel using the drop-down boxes. Pressing the Refresh button
automatically fills these fields with current information.
3.1.6 Send to Panel
After completing the desired programming on each page, click the Send to Panel button to save
changes to the panel. Selecting the Load Defaults button will apply default programming to the
given page. To then save the applied default settings to the panel, press the Send to Panel button.
The Main Menu button will disregard any programming selections and jump back to the main menu
screen. Changes made to panel programming will not be applied until log out of user programming
(selecting the Log Out button from the Main Menu) is complete. After a successful log out from
the programming utility, the panel will reboot and the changes will become effective.
3.2 Main Menu - Utilities
Services for recording messages and software file transfers via USB are located in the Utilities
menu. These program utilities require a valid password for system login. Refer to Section 3.1.1.
d
a
te
ti
m
e
.j
p
g
b
u
tt
o
n
s
.j
p
g
Figure 3.10 Main Menu
m
a
in
_
m
e
n
u
.j
p
g