Conductivity - setup menu - t. comp override 6.10, Multi-parameter transmitter user’s manual – Aquametrix SHARK TX / TXP Transmitters User Manual User Manual

Page 58

MULTI-PARAMETER TRANSMITTER USER’S MANUAL

Conductivity - Setup Menu - T. Comp Override 6.10

Conductivity - Setup Menu - T. Comp Override 6.10

Page 56

DOWN

Not stored

Stored

If you wish to save the setting, press the
key to highlight the Y character

Temperature Compensation Override is used to manually set the
actual probe or process temperature. This is useful if the probe
does not have a temperature sensor or if the process temperature
is constant. When the override is enabled, the controller will use
the selected temperature when performing temperature
compensation calculations.

NOTE

PRESS THE AND KEYS

TOGETHER TO GO IMMEDIATELY BACK TO

RUN MODE

DOWN

With "N" selected, pressing the
key will NOT store the selection, but
simply return to the T. Comp Override
Menu. This function is useful if you wish
to view the current selection without
making any changes.

RUN MODE

Press the key to accept the
reading and move to the store function

Press the key once
which will move the cursor
back to the RH side of
temperature display.

Then press the key to store the
selection and return to the T. COMP
OVERRIDE Menu.

Press the key to accept the
change and move to the Temperature
Entry function

Press the key once
which will move the cursor
over the least significant digit
of the temperature display.

Use the and to
adjust the reading until it agrees
with the known temperature of the
probe or process

The user can now enter the actual
probe or process temperature

Use the or keys to
select either ON or OFF.

Press the key once
which will move the cursor
back to the RH side of the

Press the key once
which will move the cursor to
the ON or OFF text

STORE? Y N

TEMP 35. 7 C >

TEMP 25. 4 C >

COMPENSATE O FF >

COMPENSATE O N >

T.COMP OVERRIDE

COMPENSATE ON >

T.COMP OVERRIDE

TEMP 25.4C >

TEMP 35.7C >

T.COMP OVERRIDE

CALIBRATION

UTILITIES

SETUP

1000uS 25.0C

AUTO RETURN

TEMP SENSOR

T.COMP OVERRIDE

COMPENSATE OFF >

T.COMP OVERRIDE

TEMP UNIT

COND RANGE

T.COMP OVERRIDE