Seed Hawk 30 SERIES 2014 - Manual (Page 63)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 57
5.7.6 Tramline Operation
The tramline function operation is controlled by the Drive Engage ACK key.
This allows a predetermined pattern to be repeated across a field with rows left
unseeded to facilitate the operation of sprayers. When active during a tramline
seeding pass, the control system will disengage the product flow and maintain
those two openers in the raised position, while the others engage in seeding.
During other passes not requiring the tramline rows all the openers will drop
and seed flow will go to all the openers. There are no extra operator opera-
tional functions needed once the tramline function is enabled and the tramline
pattern is established.
During an active tramline pass, an
icon of dual tire treads will appear in
the top display area of the monitor
screen.
The monitor can also display which
seeding pass in the pattern is in use.
The tramline pass will always be last
in the pattern.
1. To add this to the display press any
of the
Soft Keys to bring up the soft
key menu, then press “Item”. A high-
light box will appear over the upper
left hand window.
2. Using the Selector Knob Navigate
the highlight box to the display win-
dow you want to place the seeding
pass information and press
Enter.
The window item selection is time limited. If no action is taken after selecting
“Item” from the soft key menu the monitor will cancel the function. When
displayed, the “Field Seeding Pass” display will show 1 with the first seeding
pass, and 2 with the next pass, and then 3, etc., returning to 1 when the pattern
repeats.
3. A menu will appear with a list of all the items that can be displayed in the
window. Navigate to “Field Seeding Pass” and press
Enter.