Seed Hawk 30 SERIES 2014 - Manual (Page 49)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 43
This menu allows the user to set the units of measure, language, implement
width, the volume of the alarm, screen settings (backlight and contrast), and the
master switch mode. To access the Global Settings from the run screen press
any soft key to bring up the soft key menu and press
Setup. Navigate the high-
light bar to the “Global Settings” selection and press Enter.
At this screen you can review the basic system setup and make changes as
necessary. To make changes, navigate the highlight box to the item you wish to
adjust and press
Enter. A drop down box will appear and display the available
options. Select the desired setting and press Enter.
5.4.2 Global Settings
1. Units: Available choices are Metric,
Imperial, and US Imperial. Navigate to
the desired selection and press
Enter.
2. Language: Available choices are
English and Russian. Navigate to the
desired language selection and press
Enter.