Seed Hawk 30 SERIES 2014 - Manual (Page 45)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 39
5.3.5 Layout Menu
5.3.6 MUXBUS Sensor Setup Menu
This Soft Key Menu allows the user to configure the User Selectable Display
Window Layout based on the amount of information desired to be displayed.
This Soft Key Menu selection allows
the operator to access system set-
tings, calibration settings and factors,
as well as install, configure and cali-
brate all sensors and settings for the
monitor system.
Highlight your desired Layout Option
using the
Selector Knob or Navi-
gation Keys. Finalize your selection
by pressing the
Toggle or Enter
Key.
NOTE: The VAR Controller
listed is not used in this
application
The Setup Menu is accessed from the main screen by pressing any Soft Key to
bring up the Soft Key Menu, then selecting Setup from the Soft Key Selections.
When the Setup key is
Pressed the Menu Settings
screen lists 12 choices
5.4 Menu Settings
NOTE: The pressure sensor
listed as a MuxBus sensor
is available but a different
sensor than the Packing
Pressure sensor. That sensor
is connected to the hydraulic
drive control module and is
communicated on the CAN
network. It is called Shank
Pressure in the layout item
select menu.