Seed Hawk 30 SERIES 2014 - Manual (Page 30)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 24
4.4 Winging Down Toolbar
Prior to winging down the Toolbar, first ensure that the wing locks are removed
from both sides and the locking pins are placed in their holders.
The left side wing locking pin is shown above. Unpin both left and right wings,
before lowering.
1. Ensure all opener shanks are up.
2. Engage the lever direction in the tractor cab that the GREEN banded hoses
are hooked to, this will allow the wings to unfold into working position.
Locking Pin
Holder
3. When winging down the toolbar, release the lever once the wings are over
center, allowing the wings to lower under their own weight.
This gauge will read
the tractor pressure
while winging down.