Seed Hawk 30 SERIES 2014 - Manual (Page 51)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 45
7. Master switch mode: The choic-
es are “Manual” and “Auto”. Manual is
used when the operator engages and
disengages the drive by pressing the
ACK button at the beginning and end
of each pass. Auto is used when a lift
switch on the implement engages and
disengages the drive. Manual is the
normal mode of operation.
8. OK/Cancel: Select “OK” to save
any changes that have been made or
Cancel to ignore changes that have
been made.
1. Choosing this item will allow the
user to restore the monitor to facto-
ry defaults on all global settings. This is
useful when moving the monitor to a
new installation or when it is neces-
sary to “start over”.
5.4.3 Restore Settings to Default
2. A dialog box will appear to verify
the selection before any setup chang-
es are made in case this item was
chosen accidentally. Once reset, the
previous settings cannot be recovered
and must be set individually.