Seed Hawk 30 SERIES 2014 - Manual (Page 50)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 44
4. Volume: Sets the alarm volume
level. Navigate to this selection and
press the
Selector Knob to high-
light the item. Rotate to increase or
decrease the alarm volume and press
the
Selector Knob or Enter to set
the new alarm volume setting.
5. Backlight: Sets the display back-
light level. Navigate to this selection
and press the Selector Knob to high-
light the item. Rotate to increase or
decrease the backlight and press the
Selector Knob or Enter to set the
new backlight setting.
6. Contrast: Sets the display contrast.
N
avigate to this selection and press
the Selector Knob to highlight the
item. Rotate to increase or decrease
the contrast and press the
Selector
Knob or Enter to set the new con-
trast setting.
3. Width: This is the width of the
implement, Navigate to this item and
press
Enter. A drop down keypad
will appear allowing the operator to
enter the implement width in the
form XX.X feet or meters depending
on the units selected. Navigate to the
individual numbers and press the
Tog-
gle knob to accept.
When the total number is entered
press the
Enter key to save the new
width value.
NOTE: This is the only
instance when the Selector
Knob and the Enter key
perform separate functions.