Seed Hawk 30 SERIES 2014 - Manual (Page 43)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 37
5.3.1 System Status Menu
5.3.2 Contrast Menu
5.3.3 Version Menu
Pressing the OK Soft Key, the Enter
Key or the Toggle will allow you to
exit the menu.
To edit the contrast simply use the
Selector Knob or any of the Navi-
gation Keys to increase or decrease
the contrast.
Press the Enter Key or the Toggle-
Dial to accept the change and exit.
To access from the Main
Menu Run Screen, press any
soft key to bring up the Soft
Key Menu, press “Setup”,
then “Version”.
This Soft Key Menu displays the current status state of your system. This menu
is beneficial when checking communications and/or connections. This menu is
“view only”.
Using the Selector Knob or the
Navigation Keys allows you to view
sensors that do not fit on the main
screen.
This Soft Key Menu is quick access to view and/or change your current contrast
setting.
This Soft Key Menu displays your
current firmware version as well as
the date and times it was released for
production.
To access from the Main
Menu Run Screen, press any
soft key to bring up the Soft
Key Menu, press “Setup”,
then “Status”.
To access from the Main
Menu Run Screen, press any
soft key to bring up the Soft
Key Menu, press “Setup”,
then “Contrast”.