Seed Hawk 30 SERIES 2014 - Manual (Page 39)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 33
5.0 Seed Hawk Loup III
Air Drill Monitor
Operation
The Seed Hawk Loup III Air Drill Monitor is capable of monitoring and
displaying:
The monitor will sound an alarm to alert the operator if it detects any of the
following conditions:
The monitor allows the following settings to be changed:
• Ground Speed
• Up to 2 Fan Sensors
• 2 Motors
• 2 Bin Level Sensors
• Liquid Flow Meter • Hydraulic Pressure
• Shank Applied Down Pressure
• Field Area
• Total Area
• Low Meter Speed
• Low Bin Levels
• Loss of Motion
• Low or High Fan Speed
• Ground Speed pulses per 400 ft.
and pulses per revolution
• Low alarm point for two bins
• The width of the implement
• The display units (Imperial/Metric)
• Low and High alarm points for fan
• Pulses per Revolution for Flow
Meter
• Application rate for each meter
These settings, as well as the Field and Total Acres are stored in non-volatile
memory. This means that the information is retained even when power is dis-
connected.