Hired-Hand Evolution Series 3000/3001 - Manual (Page 19)

Part No. 4801-5307 Rev 2-10 Evolution 3000 and 3001 19 of 70
(1)Day (2)Belt1 Belt2 Belt3 Belt4
"
(3)Status On On On On
141 2:24 2:24 2:24 2:24
140 2:24 2:24 2:24 2:24
. . . . .
. . . . .
1 2:24 2:24 2:24 2:24
6.5.5 Feed History
This screen shows the estimated daily
amount of feed used and the total
time that the feed line motors have
been running.
(1) Day – The specific day in the
growout period. Values = 1
to 99 days.
(2) Usage – The amount of feed used
from Bin #1 and Bin #2
combined for each day of
growout. Measurements =
pounds (lb.).
(3) Run 1 – The total amount of run-time feed line #1 was running for each day of growout.
Measurements = Hours and minutes.
(4) Run 2 – The total amount of run-time feed line #2 was running for each day of growout.
Measurements = Hours and minutes.
(5) Status – The status of the auger current sensor whether the sensor is On or Off. ON indicates the
motor is running and OFF indicates the motor is not running.
6.5.6 Belt Run Times
This screen shows the history of the Belt
runtimes. It keeps track of the last 100 days.
(1) Day – The specific day in the growout
period.
(2) Belt 1 thru Belt 4 – The length of time in
hours and minutes that the Belt has run
on the current day.
(3) Status – The status of the belt current sensor whether the sensor is On or Off. ON indicates the motor
is running and OFF indicates the motor is not running.
6.5.7 Stage Run Times
This screen shows the length of time in hours
and minutes that the individual stages have run,
on the current day and previous day.
(1) Stage – Identifies the stage number.
(2) Current Day – The length of time in hours
and minutes that the stage has run on
the current day.
(3) Previous Day - The length of time in hours and minutes that the stage has run on the previous day.
6.5.8 Power Track Run Times
This screen shows the length of time that
the Power Track equipment has been
running.
(1) Inlet #1 and #2 - The length of time
in hours and minutes that the
inlets have run on the current
and previous days.
(2) Natural #1 and #2 - The length of
time in hours and minutes that
the natural inlets have run on
the current and previous days.
(1)Day (2)Usage (3)Auger1 (4)Auger2
(5)Status On On
41 2100 lb 4:10 9:10
40 2000 lb 3:00 8:00
. . . .
35 1500 lb 3:00 8:00
. . . .
. . . .
24 1000 lb 1:30 6:30
. . . .
. . . .
1 150 lb 1:10 6:10
(1)Stage (2)Current Day (3)Previous Day "
1 2:24 2:24
2 2:24 2:24
. . .
. . .
16 2:24 2:24
Stage Current Day Previous Day
"
(1)Inlet #1
Open 8:00 8:00
Close 10:00 10:00
(1)Inlet #2
Open 10:00 10:00
Close 10:00 10:00
(2)Nat #1
Open 1:00 1:00
Close 23:00 23:00
(2)Nat #2
Open 1:00 1:00
Close 23:00 23:00