Yokogawa DAQWORX - Manual (Page 21)

2-9 IM WX201-01E
Operat
on of the Data Search W
ndow
1
2
3
4
Index
Explanaton
Keyword specification allows you to search for files that contain the keywords in their text
or data. Files that do not contain any data of the specified search key are not included in
the search. The table below shows the types of data available by product.
DAQLOGGER AddMult AddTrgger MX100 DX100/200 MV100/200 CX1000/2000 FX100
Fle comments      
Batch nformaton   
Tag comments        
Tag numbers    
Channels        
Group names        
Marks/Messages        
 : data type exists in data file, Blank: data type not included
Note
• You can specify multiple keywords by separating them with a space.
• If multiple search keys are selected, the software searches for files whose keywords are
found in data corresponding to all of the keys.
• Up to one thousand marks/messages can be found per file. All other marks or messages
thereafter are not found.
Specfyng a Seral Number
Procedure
1. Specify a search folder. (See section 2.2)
2. Select the Serial No. check box in the Search conditions area.
3. Click the Serial No. tab or click the words “Serial No.” to the right of the check
box. The Serial No. tab is displayed.
Click to the right of each item to change the tabs on the right.
Check box
4. Enter a serial number.
Explanaton
Serial number specification allows you to search for data files of the specified instrument
serial number.
Note
• DAQLOGGER, AddMulti, and AddTrigger do not have serial numbers, and therefore data
acquired by those programs cannot be searched for using this criterion.
• Enter the serial number carefully as only exact matches will be found.
2.3 Specfyng Search Condtons