Watlow Series 988LF - Manual (Page 5)

Introduction
WATLOW Series 988LF User’s Manual iii Introduction
Notes, Cautions and Warnings
We use note, caution and warning symbols throughout this book to draw
your attention to important operational and safety information.
A bold text “NOTE” marks a short message in the margin to alert you to
an important detail.
A bold text “CAUTION” safety alert appears with information that is
important for protecting your equipment and performance. Be especially
careful to read and follow all cautions that apply to your application.
A bold text “WARNING” safety alert appears with information that is
important for protecting you, others and equipment from damage. Pay
very close attention to all warnings that apply to your application.
The ç symbol (an exclamation point in a triangle) precedes a general
CAUTION or WARNING statement.
The Ó symbol (a lightening bolt in a triangle) precedes an electric shock
hazard CAUTION or WARNING safety statement.
Technical Assistance
If you encounter a problem with your Watlow controller, review all of your
configuration information for each step of the setup to verify that your
selections are consistent with your applications.
If the problem persists, an Application Engineer can discuss your applica-
tion with you.
Before calling, please have the complete model number and user’s manual
available. You can get technical support by dialing 507/494-5656, 7 a.m.
to 7 p.m. Central Standard Time, or e-mail to [email protected].
We Value Your Feedback
Your comments and suggestions on this manual are welcome. Please send
them to, Technical Writer, Watlow Controls, P.O. Box 5580, Winona, MN
55987-5580, or call (507) 454-5300, or fax (507) 452-4507. The Series
988LF User’s Manual is copyrighted by Watlow Winona, Inc., © October
1999, with all rights reserved. (1831)