Setup prompts, Front panel lockout, Setup – Watlow Series 988LF User Manual
Page 24

Setup
4.2
WATLOW Series 988LF Users Manual
Setup Menu, Chapter 4
Setup Prompts
❸ Use the Mode key µ to advance through the
Setup Menu. You will not see every prompt in the
Setup menu; the unit’s configuration and model
number determine which prompts appear.
❹ Use the Up-arrow > and Down-arrow < keys
to change the prompt setting. To move backwards
through the menu hold the Mode key µ down
and press the Up-arrow key >. Refer to the
Appendix for model number options.
Front Panel Lockout
Sets the lockout level for the front panel. This allows you to disable
keys on the front of the controller.
• [```0] enables all keys.
• [```1] disables the Mode key µ.
• [```2] disables the Mode key µ and the Auto/Man key å.
• [```3] disables all keys.
[`LOC] This prompt always appears.
Default
↓
[```O]
[```1]
[```2]
[```3]
[`LOC]
[`LOC]
[`LOC]
[`LOC]
NOTE:
Decimal points may not
always be in the
position specified
depending on the
settings in the Decimal
[`dEC]
parameters in
the Setup Menu.
ç
Caution:
Setting
[`LOC]
to
[```2]
or
[```3]
disables the Auto/Man
key
å
and will force
the controller into
manual mode if an open
sensor occurs. Verify
that the controller is
operating in the desired
mode (auto or manual)
before setting the
lockout level. Failure to
do so could result in
damage to equipment
and/or property.
[`LOC]
TL
W
WA
PROCESS
L1
L2
DEV
% OUT
DISPLAY
SERIES 988LF
MODE
AUTO
MAN
TL
W
WA
PROCESS
L1
L2
DEV
% OUT
DISPLAY
SERIES 988LF
MODE
AUTO
MAN